DR5200 Ultrasonic Flowmeter
DR5200 Ultrasonic Flowmeter
Ultrasonic flowmeter are designed to measure liquid fluids in closed pipes. The probes are clamped on the outside of a closed pipe, and works by alternating a sequence of frequency-modulated pulses that transmit and receive acoustic energy between the two sensors, And the ultrasonic flowmeter measure the travel time it takes for the sound to travel between the two sensors.
Applications
- Petroleum, chemical industry, metallurgy
- Textile, papermaking, environmental protection
- City water supply and drainage
Features
- Non contact liquid level measurement, does not affect the flow rate;
- Power consumption, simple installation and easy positioning;
- Easy to operate, no need to calibrate the signal input;
- Historical flowmeter recording;
- Four relay signal output;
- Various probe types are available;
- Built in remote communication module;
Technical Specs
| Accuracy | Linearity: better than 0.5%, Repeatability: better than 0.2%, Accuracy: better than ±1% | Medium conductivity | >5μs/cm ;Water≥20μs/cm |
| Flow rate range | 0 ~ + -10m / s, positive and negative measurement | Fluid temperature | -30℃-160℃ |
| Pipe diameter | DN100-DN6000 | Ambient temperature: | -25℃~60℃ |
| Medium | Water, sea water, sewage, acid and alkali, alcohol, beer, all kinds of oil | Communication interface | RS485, MODBUS protocol |
| Pipe material | Steel, stainless steel, cast iron, copper, PVC, aluminium, fiberglass and other all the tight pipe, allowing a lining. | Protection level | IP65 |
| Signal output | 4-20mA current output, impedance 0-1k, accuracy 0.1%; OCT pulse output ,pulse width 6~1000ms; Relay output; | Power supply | DC8 ~ 36V or AC85 ~ 264V |
Sensor and Installation Type
Outline Construction (Unit: mm)
