🔧 Industrial Instrumentation Weekly Digest
Week of: September 14, 2026 – September 21, 2026
Your weekly update on pressure measurement, industrial IoT, and process automation news.
📅 September 19, 2026
- Predicting Thermal Conductivity in Advanced BEOL Interconnect Stacks (Peking University)
📝 Researchers at Peking University published a technical paper titled “Predictive Structure to Thermal Conductivity Modeling Framework for BEOL Interconnect Stacks in Advanced Technology Nodes Enabled b
📰 Source: SemiEngineering - Agentic AI Automates Design-Rule Repair While Preserving Layout Equivalence (Purdue University)
📝 Researchers at Purdue University published a technical paper titled “DRC-Aid: Design-Rule Correction via Agentic Framework utilizing Inference-Time Large Language Models.” Abstract Excerpt: “We presen
📰 Source: SemiEngineering - Reinforcement Learning Cuts Routing Violations in Dense Chip Layouts (NYU)
📝 Researchers at New York University published a technical paper titled “Routing Dense Layouts with History-Aware Offline Reinforcement Learning using LSTM.” Abstract Excerpt: “Detailed routing remains
📰 Source: SemiEngineering - Chiplet Co-Design Framework Reduces Energy and Design Costs for AI Accelerators (University of Michigan)
📝 Researchers at the University of Michigan published a technical paper titled “Fengshui: Demystifying Chiplet Ecosystem and Bespoke Neural Network Accelerator Codesign.” Abstract Excerpt: “This paper i
📰 Source: SemiEngineering - Open Benchmark Evaluates AI Thermal Models for 2.5D and 3D ICs (UTS, TU Munich, ShanghaiTech)
📝 Researchers at the University of Technology Sydney, ShanghaiTech University, and Technical University of Munich published a technical paper titled “IC-ThermBench: An Open, Progressive Benchmark for Ge
📰 Source: SemiEngineering - AI in Chip Design: From Code Generation to EDA Orchestration (University of Edinburgh)
📝 Researchers at the University of Edinburgh published a technical perspective titled “LLMs in Digital EDA: A perspective on shifting roles from Generation to Orchestration.” Abstract Excerpt: “In this
📰 Source: SemiEngineering - Unified Chiplet Network Scales Neuromorphic Computing Systems (Heidelberg University)
📝 Researchers at Heidelberg University published a technical paper titled “A Unified Interconnection Network for Chiplet-Based Scaling of the BrainScaleS Neuromorphic System.” Abstract Excerpt: “To over
📰 Source: SemiEngineering
📅 September 18, 2026
- Pickering reed relays proven to have 88% lower thermal EMF enabling compactness and precision
📝 Pickering Electronics, a leading manufacturer of high-performance reed relays, has published new comparative test data showing that the company’s compact reed relays produce substantially less thermal
📰 Source: Instrumentation - Compact, lightweight and excellent performance: the new OPTIMASS 5400
📝 KROHNE has introduced the OPTIMASS 5400, a new Coriolis mass flowmeter designed for standard process applications with gases and liquids. The new device provides customers with an optimised balance of
📰 Source: Instrumentation - How to engineer EMC from concept validation to production validation
📝 By Nathan Reeve, EMC Product Specialist, Rohde & Schwarz EMC evaluation can be more thorough and time efficient using a test receiver equipped with special features including time-domain analysis and
📰 Source: Instrumentation - Fluke expands iSee Mobile Series with new TC03A thermal camera and ii01 acoustic camera
📝 As maintenance teams face growing pressure to keep assets running with fewer technicians and tighter maintenance schedules, they need inspection tools that are faster, easier to use and seamlessly con
📰 Source: Instrumentation - HARTING ix Industrial PushTrigger IP20 connectors now at Mouser
📝 Mouser Electronics, the authorised global distributor with the newest electronic components and industrial automation products, is now stocking the ix Industrial PushTrigger IP20 connectors from HARTI
📰 Source: Instrumentation - Chip Industry Week In Review
📝 Major memory deal; AI Infra Summit news; U.S. chip capacity plans; 2nm & below advances; Huawei’s chip offensive; RoT solution for data centers and AI SoCs; Chinese equipment makers gain share; India’
📰 Source: SemiEngineering - EWI Leads INSITE Program for In-Process Additive Manufacturing Inspection
📝 EWI has been selected by America Makes to lead a new $13.2 million national program aimed at solving one of the biggest barriers to using additive manufacturing for critical defense parts: the cost an
📰 Source: Metrology News - 1factory Integrates Compliance with Shop-Floor Quality
📝 Most manufacturers run quality in two disconnected worlds. Compliance lives in one: procedures, training records, corrective actions, and audit documentation scattered across binders, shared drives, a
📰 Source: Metrology News
📅 September 17, 2026
- HBK opens registration for Technology Days
📝 Test and measurement expert, Hottinger Brüel & Kjær (HBK) has announced the return of its annual Durability and Reliability Technology Days. Now in its seventh year, the free virtual series will take
📰 Source: Instrumentation - ABB launches dust monitoring solution for hazardous environments
📝 ABB has launched the PFM 20 Ex, a new dust monitoring device designed for hazardous and harsh industrial environments. The product delivers a certified dust detection range down to 7.5 mg/m³ and meets
📰 Source: Instrumentation - Emerson advances connected test operations to improve engineering productivity and quality
📝 Global automation leader Emerson has announced enhancements to its NI SystemLink software, expanding the connected test operations software with resource scheduling and NI Nigel AI capabilities to hel
📰 Source: Instrumentation - Dukosi announces Graeme Cook as Chief Financial Officer
📝 Dukosi, the technology company revolutionising the performance, safety and sustainability of high-power battery systems, has announced the appointment of Graeme Cook as Chief Financial Officer (CFO),
📰 Source: Instrumentation - Vaisala launches care services to help data centres maintain measurement accuracy at scale
📝 Growing data centres require a new approach to managing measurement performance. Driven by AI, cloud infrastructure and digital services, facilities are becoming larger and more complex, creating new
📰 Source: Instrumentation - Why Package Digital Twins Are So Hard To Build
📝 Models need to be synchronized with what manufacturing actually builds.
The post Why Package Digital Twins Are So Hard To Build appeared first on Semiconductor Engineering.
📰 Source: SemiEngineering - Negative Expansion Materials Resist Warpage
📝 Molding compounds and underfill can improve thermal stability.
The post Negative Expansion Materials Resist Warpage appeared first on Semiconductor Engineering.
📰 Source: SemiEngineering - AI Smart Camera Solution to Accelerate Smart Manufacturing
📝 USI has announced its next-generation AI Smart Camera solution, a comprehensive edge AI and vision platform that empowers manufacturers to accelerate digital transformation through AI-driven quality i
📰 Source: Metrology News - Lumafield Uses Agentic AI to Detect Unknown Manufacturing Defects
📝 Lunafield has announced Lumafield Quality Agent, an agentic AI system that automates defect detection and root-cause analysis across complex manufacturing processes. Quality Agent runs natively inside
📰 Source: Metrology News - PrismIQ Launch Brings AI-Powered Visual Inspection to Manufacturing
📝 Opsio, a Swedish managed cloud services and artificial intelligence company, has announced the global launch of PrismIQ its automated visual inspection service for manufacturers.
The post PrismIQ Lau
📰 Source: Metrology News - Integrate physics education research by fixing departmental structures
📰 Source: Nature
📅 September 16, 2026
- CAM2 Enhancements Integrate Handheld 3D Scanning for Casting Inspection
📝 FARO CREAFORM, a global provider of 3D scanning and portable CMM solutions, has announced the launch of new casting inspection enhancements for its CAM2 software platform.
The post CAM2 Enhancements
📰 Source: Metrology News - AR-Based Visual Inspection for Heavy Fabrication and Welded Structures
📝 In heavy fabrication environments, quality inspection often involves large welded structures with multiple features that must be checked against engineering requirements. Accessing the correct referen
📰 Source: Metrology News - From Sampling to Seeing – How Optical Metrology is Redefining Manufacturing Quality
📝 For decades, industrial metrology has been built around a familiar premise: measure a sample, verify compliance, and assume the rest of production follows suit. Coordinate Measuring Machines (CMMs), h
📰 Source: Metrology News - The Hidden Cost of Poor Quality in Regulated Manufacturing
📝 Poor quality rarely announces itself as a single, contained problem. In manufacturing environments, it may first appear as a rejected batch, a scrapped component, an unexpected line stoppage, or a cus
📰 Source: Metrology News
Stay updated with the latest in industrial instrumentation.
🔗 Fandesensor – Industrial Pressure & Level Measurement Solutions
🕒 Published on: 9/21/2026, 12:30:21 AM
