DR3416 Melt Pressure Transmitter
DR3416 Melt Pressure Transmitter
The melt pressure transmitter converts the pressure signal into non-interference amplification signal, output 4 ~ 20mA, 0-5V, 0 ~ 10V multiple signals can be selected, which can be inputted directly to the upper computer control system, it built-in temperature thermocouple, which can realize the same point measurement of pressure and temperature.
Applications
- Plastic, rubber manufacturing equipment
- Chemical fiber drawing equipment
- Medicine, food processing, packaging equipment
Features
- Rigid rod and hose diaphragm isolation structure
- Full range zero adjustable
- 80% internal calibration
- Multiple signal output
Technical Specs
| Measurement range | 0bar~1bar…1000bar | Response Time | ≤20ms |
| Pressure type | Gauge Pressure | Permanent Stability (1 Year) | ≤0.3% FS |
| Over pressure | 150%FS | Internal self-calibration | 80%FS |
| Measuring Medium | Liquid, flux | Temperature model | E, J, K, Pt100 |
| Accuracy | ±0.1% FS | Diaphragm temperature | 300℃(DR3416A) 400℃(DR3416B, (DR3416C) |
| Repeatability | ±0.1%FS | Storage Temperature | -40~120ºC |
| Hysteresis | ±0.1%FS | Electrical connection | 5 PIN plug connection |
| Output | 4mA~20mA DC; 0~5V DC; 0~10V DC; | Pressure interface | 1/2″-20UNF, M14×1.5, M18×1.5 M22×1.5,G3/4 (customized) |
| Bridge impedance | 350Ω ±10%; 1000Ω ±10% | Power supply | 24VDC |
Ordering Guide
| DR3416 | High Temperature Melt Pressure Transmitter | |||||||
| Range | 0bar~100bar…1000bar | |||||||
| [0～X]bar | X: the actual measured pressure | |||||||
| Code | Output signal | |||||||
| A | Rigid bar | |||||||
| B | Rigid bar + hose | |||||||
| C | Rigid bar + hose + temperature | |||||||
| Code | Pressure interface | |||||||
| 1/2 | 1/2″-20UNF | |||||||
| M14 | M14*1.5 | |||||||
| M22 | M22×1.5 | |||||||
| Code | Probe length | |||||||
| N | N/A | |||||||
| 3 | 3″(76mm) | |||||||
| 6 | 6″(150mm) | |||||||
| 9 | 9″(230mm) | |||||||
| 12 | 12″(320mm) | |||||||
| Code | Hose length | |||||||
| N | N/A | |||||||
| 18 | 18“(460mm) | |||||||
| 30 | 30“(760mm) | |||||||
| Code | Output | |||||||
| MA | 4~20mA | |||||||
| 5V | 0~5V | |||||||
| 10V | 0~10V | |||||||
| Code | Thermocouple | |||||||
| RTD1 | PT100 | |||||||
| E | E | |||||||
| K | K | |||||||
| J | J | |||||||
| DR3416- | [0~1]bar | A | 1/2 | 6 | N | MA | RTD1 | The whole spec |
Outline Construction (Unit: mm)
Electrical Connection
Hole Dimension (Unit: mm)
FAQ
What is a melt pressure transmitter?
Melt pressure sensors are specialized sensors used to measure pressure during extrusion. Fandesensor provide a variety of options including rigid rods , rigid rods with flex and pressure and temperature version.
What is a melt pressure sensor application?
This instruments used to measure pressure in industries such as plastics, rubber, food, wire coating, pipe, tubing and profile, synthetic fibers.. no damage to the machine due to high pressure conditions is prevented.
What is melt pressure sensor?
The high temperature melt pressure sensor is an electronic device that transforms a physical variable (pressure) into an electrical signal (current or voltage or in Can Open, IO-LINK, HART), acquired by the various control, measurement and regulation devices.