Why Do Pressure Measurement Errors Occur in Industrial Systems?
A pressure reading may look normal, but does it always reflect what is happening inside your equipment? Not necessarily. Pressure measurement errors can develop for several reasons, including sensor drift, temperature changes, incorrect pressure range selection, poor installation, and calibration issues.
In industrial applications, even small measurement deviations can affect process control, product quality, equipment performance, and maintenance decisions. Understanding where these errors come from is the first step toward improving measurement reliability.
This guide explains the most common causes of pressure measurement errors and practical ways to reduce them.
1. What Are Pressure Measurement Errors?
Pressure measurement errors are differences between the actual process pressure and the value reported by a pressure sensor or transmitter.
These differences can appear as:
- Zero error: The sensor shows a pressure value when the actual pressure is zero.
- Span error: The measurement deviation increases or changes across the pressure range.
- Nonlinearity: The sensor output does not follow the expected relationship with applied pressure.
- Temperature-related error: Changes in temperature affect the sensor’s zero point or sensitivity.
- Measurement drift: The output gradually changes over time, even when the applied pressure remains stable.
- Repeatability error: The sensor produces different readings under the same pressure conditions.
Not every measurement deviation indicates a defective sensor. The problem may come from the installation, electrical signal, calibration method, or the operating conditions.
Identifying the type of error helps engineers choose the right corrective action.
2. Common Causes of Pressure Measurement Errors
2.1 Temperature Changes
Temperature is an important factor in pressure measurement.
Changes in ambient or process temperature can affect the sensing element, electronic components, and mechanical structure of a pressure transmitter. Depending on the sensor design, these effects may cause zero drift or span variation.
For example, a transmitter installed near a hydraulic power unit may experience different ambient temperatures during startup and continuous operation. If its temperature characteristics are not suitable for the application, the displayed pressure may shift as the equipment warms up.
To reduce temperature-related errors:
- Check the transmitter’s compensated temperature range.
- Confirm that the working temperature is suitable for the installation environment.
- Select a sensor with appropriate temperature compensation.
- Avoid exposing the transmitter electronics to temperatures beyond their rated limits.
Temperature compensation can reduce temperature-related measurement deviations, but it does not make a transmitter suitable for unlimited temperatures.
2.2 Sensor Drift Over Time
Pressure sensor drift refers to a gradual change in output under otherwise stable pressure conditions.
It may result from long-term mechanical stress, temperature cycling, material aging, vibration, or changes in the sensing element.
Drift can be difficult to identify because the output may remain within an expected operating range while slowly moving away from the correct value.
For applications requiring consistent measurement, engineers should consider:
- Long-term stability specifications.
- Zero-point and span verification.
- Regular calibration based on operating conditions.
- Pressure cycling and environmental conditions.
- Changes in measurement results over time.
A transmitter with good initial accuracy is not automatically the best choice if its long-term stability does not meet the application’s requirements.
2.3 Incorrect Pressure Range Selection
Choosing the wrong pressure range can also reduce measurement quality.
For example, using a 0–1000 bar transmitter to measure a process that normally operates around 10 bar may provide less useful measurement resolution than selecting a suitable lower range.
The pressure range should account for:
- Normal operating pressure.
- Maximum expected pressure.
- Pressure peaks and transient conditions.
- Possible overpressure during startup or equipment faults.
- Required measurement accuracy and resolution.
A practical selection should provide enough measurement headroom without choosing an unnecessarily large full-scale range.
2.4 Calibration and Zero-Point Problems
Calibration verifies the relationship between applied pressure and the transmitter’s output signal.
Incorrect calibration, an unsuitable reference instrument, or an unstable test setup can introduce measurement errors.
Common warning signs include:
- A non-zero reading when the system is depressurized.
- Differences between the transmitter and a reference gauge.
- Inconsistent readings at the same pressure point.
- Increasing deviation between calibration checks.
Before adjusting the transmitter, confirm that the reference instrument, pressure source, connections, and test conditions are suitable.
For critical applications, calibration should cover multiple points across the working range rather than checking only zero and full scale.
2.5 Installation and Electrical Signal Issues
A pressure transmitter is part of a complete measurement system. Installation and signal transmission can affect the final reading.
Potential problems include:
- Incorrect pressure connection or sealing.
- Leakage at the process connection.
- Excessive vibration or mechanical stress.
- Poor grounding or electromagnetic interference.
- Incorrect power supply or electrical wiring.
- Signal conversion errors in PLC or control equipment.
When the transmitter output and the control-system display do not agree, compare the signal directly at the transmitter terminals before assuming the sensing element is faulty.
3. How to Identify the Source of a Pressure Measurement Error
Replacing a pressure transmitter immediately is not always necessary. A systematic check can help identify whether the problem comes from the sensor, installation, or control system.
The following steps provide a practical starting point.
Step 1: Check the actual process pressure
Use a suitable reference pressure gauge or calibration instrument to compare the process pressure with the transmitter reading.
Step 2: Check the zero point
If the process can be safely depressurized, verify whether the transmitter returns to its expected zero value.
Step 3: Compare readings at several pressure points
Check the output at multiple points across the measurement range. This can help identify zero error, span error, and nonlinearity.
Step 4: Review temperature conditions
Record the ambient and process temperatures when the deviation occurs. Check whether the operating conditions fall within the transmitter’s specified temperature limits.
Step 5: Inspect the electrical signal
Verify the power supply, wiring, grounding, output signal, and PLC input configuration.
Step 6: Review calibration history
Compare current measurements with previous calibration records to identify gradual changes or recurring deviations.
This process helps separate sensor-related problems from installation and signal-processing issues.
4. How to Choose a Pressure Transmitter with Better Measurement Accuracy
When measurement accuracy directly affects product quality, equipment testing, or process control, transmitter selection deserves careful attention.
Here are five important factors to consider.
4.1 Accuracy Specification
Accuracy is commonly expressed as a percentage of full scale (%FS).
For example, a transmitter with ±0.05% FS accuracy and a 100 bar full-scale range has a specified accuracy deviation of ±0.05 bar under the applicable reference conditions.
This is different from percentage of reading. Engineers should understand the specification before comparing different transmitters.
4.2 Temperature Compensation
Check the compensated temperature range rather than relying only on a general operating temperature specification.
These two values describe different conditions. A transmitter may operate safely across a certain temperature range while its specified accuracy is maintained over a narrower compensated range.
4.3 Long-Term Stability
Long-term stability indicates how much the output may change over a specified period under defined conditions.
It is particularly important for equipment that operates continuously or requires consistent measurement over extended periods.
4.4 Pressure Range and Overpressure
Choose a range that matches the normal operating pressure and expected pressure peaks.
Also check the transmitter’s overpressure rating. A suitable overpressure rating helps protect the sensing element when pressure temporarily exceeds the normal measurement range.
4.5 Output Signal and System Compatibility
Confirm that the transmitter output matches the receiving equipment.
Common industrial options include:
- 4–20 mA for PLC and process control systems.
- 0–5 V or 0–10 V for compatible analog input systems.
- RS485 for digital communication where supported.
The power supply, wiring, load resistance, and input configuration should also be checked before installation.
5. DR3419: A High-Accuracy Option for Precision Pressure Measurement
![]()
For applications where measurement accuracy and stability are important, the FANDE DR3419 High-Accuracy Pressure Transmitter is one option to consider.
The DR3419 offers accuracy options down to ±0.05% FS. It also uses digital temperature compensation and nonlinear correction technology to support more consistent pressure measurement.
Its specifications include:
- Accuracy: Options down to ±0.05% FS.
- Pressure range: -1 bar to 1000 bar, depending on configuration.
- Output: 4–20 mA or 0/1–5/10 V DC, depending on configuration.
- Compensated temperature range: -10°C to +80°C.
- Working temperature: -30°C to +70°C.
- Pressure type: Gauge, absolute, or sealed gauge options.
These features make the DR3419 suitable for precision measurement applications where a more accurate pressure signal is required.
Potential applications include:
- Hydraulic test benches.
- Industrial machinery and OEM equipment.
- Laboratory pressure measurement.
- Equipment performance testing.
- Precision process monitoring.
Important: The DR3419 is not designed for direct exposure to 400°C molten material. For high-temperature melt pressure measurement, a dedicated melt pressure transducer with an appropriate high-temperature probe and construction should be selected.
The correct model and configuration should always be confirmed against the actual pressure range, temperature conditions, process connection, and output requirements.
6. Better Pressure Data Supports Better Process Decisions
Pressure measurement is more than displaying a number. It provides information that engineers use to monitor equipment, adjust processes, and evaluate product quality.
When measurement errors go unnoticed, operators may respond to incorrect information. This can lead to unnecessary adjustments, repeated testing, troubleshooting time, or inconsistent production results.
A reliable measurement system depends on more than the transmitter’s accuracy rating. Sensor stability, temperature performance, calibration, installation, and signal compatibility all contribute to the final result.
By identifying the source of measurement errors and selecting a transmitter that matches the application, manufacturers can improve confidence in their pressure data and make better process decisions.
Conclusion
Pressure measurement errors can result from temperature changes, sensor drift, incorrect range selection, calibration problems, or installation and electrical issues.
The best solution starts with identifying the actual source of the deviation. Engineers should evaluate the entire measurement chain rather than replacing the sensor without investigation.
For applications requiring high measurement accuracy, the FANDE DR3419 offers accuracy options down to ±0.05% FS, digital temperature compensation, and multiple output configurations.
Are you experiencing unstable pressure readings in your equipment? Contact FANDE with your pressure range, operating temperature, required accuracy, and output signal. Our team can help you evaluate a suitable pressure transmitter for your application.
Explore the DR3419 High-Accuracy Pressure Transmitter
🔧 Need a Reliable DR3419 Precision Pressure Transmitter?
Contact our engineering team for a free consultation on DR3419 solutions tailored to your application.
Tags: #precisionpressuretransmitter #0.05%accuracy #temperaturecompensatedpressuresensor #DR3419